-Frequency Response (Bypass Mode):Follows standard 50μs or 75μs pre-emphasis curve ±0.10 dB, 2.0 Hz–15 kHz. Analog left/right output and digital output can be user- configured for flat or pre-emphasized output. -Noise: <–85 dB below 100% modulation, 30-15,000 Hz, deemphasized. -Total System Distortion (de-emphasized, 100% modulation): <0.01% THD, 20 Hz–1 kHz, rising to <0.05% at 15 kHz. <0.02% SMPTE IM Distortion. -Total S . . .

Read More

-Frequency Response (Bypass Mode):Follows standard 50μs or 75μs pre-emphasis curve ±0.10 dB, 2.0 Hz–15 kHz. Analog left/right output and digital output can be user- configured for flat or pre-emphasized output.
-Noise: <–85 dB below 100% modulation, 30-15,000 Hz, deemphasized.
-Total System Distortion (de-emphasized, 100% modulation): <0.01% THD, 20 Hz–1 kHz, rising to <0.05% at 15 kHz. <0.02% SMPTE IM Distortion.
-Total System L/R Channel Separation: >55 dB, 20 Hz – 15 kHz; 60 dB typical.
-Polarity (Two-Band and Bypass Modes): Absolute polarity maintained. Positive-going signal on input will result in positive-going signal on output.
-Processing Sample Rate: The 5518 is a “multirate” system, using internal rates from 64 kHz to 512 kHz as appropriate for the processing being performed. L/R overshoot limiters operate at 256 kHz (and are anti-aliased), while the composite limiter operates at 512 kHz.
-Processing Resolution: Internal processing has 24 bit (fixed point) or higher resolution.

Read Less