Allen & Heath ZED-428 Specs -Total # Of Inputs 28 -Mic/Line Inputs 3-pin XLR Balanced Microphone x24 -1/4" Phone Balanced Line x28 -Stereo Line Inputs ST1 - ST2 1/4" Phone L/R Stereo -In-Line Inputs/Returns No -AUX Sends 1/4" TRS Phone x4 -AUX Returns No -Inserts 1/4 TRS Phone x30 (Mono chs., Main Stereo Out and Four Buses) -BUS (Group) Outputs 1/4" TRS Phone x4 -2 Trk Master I/O Main Output: Balanced 3-pin XLR -Mono Output: Balanc . . .

Read More

Allen & Heath ZED-428 Specs
-Total # Of Inputs 28
-Mic/Line Inputs 3-pin XLR Balanced Microphone x24
-1/4″ Phone Balanced Line x28
-Stereo Line Inputs ST1 – ST2 1/4″ Phone L/R Stereo
-In-Line Inputs/Returns No
-AUX Sends 1/4″ TRS Phone x4
-AUX Returns No
-Inserts 1/4 TRS Phone x30 (Mono chs., Main Stereo Out and Four Buses)
-BUS (Group) Outputs 1/4″ TRS Phone x4
-2 Trk Master I/O Main Output: Balanced 3-pin XLR
-Mono Output: Balanced 3-pin XLR
-ALT I/O USB Connector
-1/4″ Phone Mono Output
-1/4″ Phone Direct Outputs x16
-Monitor Outputs RCA Stereo Phono – ALT Out
-RCA Stereo Phono – REC Out
-EQ Section 3-Band with Mid Sweep On all Mono Channels
-2Band On Stereo Channels
-Solo/Mute Mute and PFL Solo
-Channel Level Control 100mm Fader
-Trim/Gain Control Rotary Control
-Phantom Power +48V Switched Globally
-Metering 12 Segment Peak LEDs
-Frequency Response 20Hz to 20kHz
-Dynamic Range Not Specified By Manufacturer
-Signal-to-Noise Ratio -88dBu
-Total Harmonic Distortion (THD) 0.004%

Read Less